Description

CONDITION OF SUBSTRATE

  • The substrate to be coated must be clean, grease-free and absolutely dry.
  • On areas which are difficult to reach, must be dried additionally with absorbent
    cloths or blown dry with compressed air.
  • On contact with a damp substrate surface, the product reacts prematurely andcannot form a permanent seal.
    The substrate temperature must be between 41o F. / 86o F, the relative humidity
    at 30-80 %.
  • Suitable for non-absorbent surfaces.
  • Depending on how absorbent the surface is, test in small areas before
    application. ( Do not apply Fiberglass / PVC surfaces before 2005